Other Products ｜2350 Bor-Max® Series Augers Extension

An auger with some serious bite. Born from over five decades of in the trenches engineering expertise and field experience. The pitched boring head plus, increased pitched and cupped flighting make your digging experience extra special.
Better penetration and ripping action, more aggressive in tougher soils. If that’s not enough, the power required to dig that ol’ hole in the ground is minimized. Means less stress on you and the digging machine. If you don’t like cleaning up the post dig mess, the cupped flighting produces cleaner holes with less spill back. Creates more time for you to do other things like dig more holes. You just may not want to stop. Finally, an auger with a silver lining. Engineered for maximum performance, taking daily abuse and extending service life. Same inventory can be used for both the 242H and 262H EPIC® hole diggers. Excellent for small hand-held hole diggers. Get real, get Bor-Max, it’s time to rip a hole a new one. Do it for fun, do it to gain more money. It’s up to you. Now you have a choice. Go for both if you like. Can you dig it?
Features/Benefits:

1.0 inch diameter round auger drive connection
Increased flighting pitch minimizes power required
Cupped flighting produces cleaner holes with less spill back
Heavy-gauged, steel, helicoid flighting for added structural strength
Heavy-walled, steel, axle to better withstand bending and torque loads
Pitched, cast steel boring head for maximum penetration, strength & service life
Cutting blade extends past flighting edge to minimize flighting wear & extend service life

Specifications

Soil Classification Applications

Soil Classification Applications
Smaller fencing, decks, landscaping & other similar projects in loam, sand, soft clay and granular rubble soil classifications

Auger

Auger Drive Connection
1.0 inch (25.4 mm) round

Auger Pin Connection
.375 inch (9.5 mm) diameter auger pin

Available Auger Diameter Range
2.25 to 12.0 inches (57.2 to 304.8 mm). Select auger from table above for specific details

Auger Cutting Diameter
Select auger from table above for specific details

Effective Auger Digging Depth
30.0 inches (762.0 mm)

Available Auger Extension
15.0 inches (381.0 mm), plain tube-type

Flighting Thickness
.187 (4.7 mm)

Flighting Construction
Single pitch helicoid, full axle length, all diameter augers

Axle Diameter
2.25 & 3.25 inch (57.2 & 82.6 mm) diameter augers: 1.25 inch (31.6 mm)4.0 to 12.0 inch (101.6 to 304.8 mm) diameter augers: 1.5 inch (38.1 mm)

Boring Head
Cast steel boring head on 4.0 to 12.0 inch (101.6 to 304.8 mm), screw bit acts as boring head/cutting device on 2.25 & 3.25 inch (57.2 & 82.6 mm) diameter augers

Screw Bit
Field replaceable, alloy steel centering screw bit, heat treated for extended service life2.25 inch (57.2 mm) diameter auger uses P302PAK2 screw bit only3.25 inch (82.6 mm) diameter auger uses P801PAK3 screw bit only4.0 to 12.0 inch (101.6 to 304.8 mm) diameter augers use SB26 screw bit only with integral 1.0 inch(25.4 mm) square drive lug.

Cutting Blade
Field replaceable, bolt retention, alloy steel cutting blade, cold forged & heat treated 4.0 to 12.0 inch(101.6 to 304.8 mm) diameter augers only

General

Product Dimensions (L X W X H)
Select auger from table above for specific details

Product Weight
Select auger from table above for specific details

Compatible Product
2.25 to 8.0 inch (57.2 to 203.2 mm) diameter augers for 242H & 262H EPIC® Series hole diggers10.0 & 12.0 inch (254.0 to 304.8 mm) diameter augers for 262H EPIC® Series hole digger only
Brand:General EquipmentSKU:2350-2ETags:Auger EquipmentOptions:2350-2E 2.25 Inch Diameter, 2350-3E 3.25 Inch Diameter, 2350-4E 4.0 Inch Diameter, 2350-6E 6.0 Inch Diameter, 2350-8E 8.0 Inch Diameter, 2350-10E 10.0 Inch Diameter, 2350-12E 12.0 Inch Diameter